<< Click here to display Table of Contents >> Navigation: ProSig Planning System > Processes > SCT Planning > Tools for Use with ProSig System Objects > Locating Objects:

Locate Individual Objects

Contents

Process:

•Location of individual objects by selection in the drawing.

Requirements:

•Assigning the Route Data

Description:

The Location can be performed separately for individual selected objects. The object selection may include multiple objects, which are then processed one after the other during the function execution. If the function is executed over an object which is not assigned to an edge, the corresponding edge can be selected during the localization process.

Procedure:

1.To locate the individual objects, execute the function 'Locate Object(s)'.

Command Line: VERORTE_E

Ribbon: ProSig EPU -> Tools -> Services -> Locate Object(s)

oOutput in the command line: 'Choose objects for localizing:'
Select the object or objects to be located in the drawing and confirm the selection.

2.If no topological edge is assigned to the object or if the object was inserted with a lateral distance to the topological edge, the corresponding edges (layer: PRS-TOPOLOGICAL EDGE) need to be selected.

oOutput in the command line: 'Please select edge/s for: [Object type] [Object title].'
Select one or more topological edges to which the localized object should refer.

3.If the localization is successful, no further message is displayed. If the localization failed, a text file with zoom functions for the objects not located is generated.

Verorte_e_report
Illus.: Output when the localization failed

4.With the function Edit Object(s) it is verified that the location of objects is performed correctly.

Command Line: OE

Ribbon: ProSig EPU -> Tools -> Edit Object(s)


Illus.: Object attributes of a signal before localization with VERORTE_E	Illus.: Object attributes of a signal after localization with VERORTE_E

Illus. number	Attribute	Corresponds	Change
B, F	Distance TOP	Distance of the object from the start node of the topological edge (specification of several distances for several edges)	Value has been entered (Unit: Meter)
C, G	Lateral distance	Lateral distance of the object from the topological edge	Value has been entered (Unit: Meter)
A, E	Edge	Topological edge at which the object is located (multiple edges can be specified)	Object ID of the topological edge has been linked (if multiple edges are specified, the specification is separated by a comma)
D, H	Orientation by edge	Working direction of the object in relation to the direction of the topological edge (specification of multiple working direction for multiple edges)	Value has been entered (in / against / none / both) (if multiple working directions are specified, the indication is separated by a vertical line)

Table: Overview for verifying Object Attributes by Location