Example: Inserting a Distant Signal Repeaters

Process:
 

•Inserting a distant signal repeater using the example 60VWzu22 with Zs3v and Marker light.

Requirements:
 

•see Signals - EPU

 
Description:

Using the example 60VWzu22 the procedure for creating a distant signal repeater is explained step by step.

After inserting the signal and editing the attributes in the dialog area 'Signal' the corresponding signal aspects of the screen and the signal type indicators are generated automatically.  For the designation plate and for the signal aspect pre-speed announcer at signal (Zs3v) separate signal frames are created. For the signal, at the end the signal mounting 'Fundament' is created.

It is described which attributes have to be edited in order to achieve a correct view in the drawing and (at a later time) ensure a complete export.

Procedure:
 

1.With the button 'New' (A) a new signal is inserted, as described under Insertion of Signals. To edit this example, select the Signal type 'Leer'.

Illus.: Newly Inserted Signal

oWhen inserting, select a point on the topological edge.

oThe Signal is generated with a Signal mount (B) ('Mounting type' (C) = 'Signalanordnung Mast') and an empty Signal frame (D) ('Frame type' (E) = 'Schirm').

2.The following attributes should be edited in the section Signal (F):

Table: Attributes to be edited in the section Signal

Illus.: Editing the attributes for the Screen and the Signal Type Indicators

oAfter changing the attribute 'Schirm: Art' (G), the corresponding signal aspects are automatically created.

▪The Signal aspect of the main screen (Signal aspect IDs = 'Ks_1' (K), 'Ks_2' (L) and 'ZL_u' (M)) are assigned to the Signal frame with the frame type 'Schirm' (I).

3.For the automatically created Signal mount (H) the following attributes have to be edited:

Table: Attributes to be edited for Signal Mounting

4.To determine the switch-ability of the Signal aspects for the screen, after marking the Signal frame 'Schirm' (I) in the section Signal aspect (J) the following attributes have to be edited for the assigned Signal aspects:

Table: Object attributes to be edited for the existing Signal aspects of the Signal frame Screen

5.To create a new Signal frame for the Bezeichnungsschild (O), first mark the Signal mounting with the 'Mounting type' = 'Signalanordnung Mast' (N). Then create a new Signal frame with the button 'New' (Q) in the section Signal frame.

Illus.: Editing the attributes for the Designation plate, Speed indicator at signal and Pre-speed announcer at signal

The Following attribute should be adjusted:
 

Table: Attribute to be edited for the newly created Signal frame Designation plate

oFor the Bezeichnungsschild (O), no Signal aspects are created.

6.To Plan the Zs 3v at signal ZU22 (S, T, U, V), first mark the Signal mounting with the 'Frame type' = 'Signalanordnung Mast' (N). Then create a new Signal frame (P) with the button 'New' (Q) in the section Signal frame. The following attribute should be adjusted:
 

Table: Attribute to be edited for the newly created Signal frame

7.After marking the new Signal frame 'Zusatzanzeiger' (P) in the section Signal frame, the button 'New' (R) is used to create the following Signal aspect for Zs 3v (S, T, U, V)::

Table: Signal aspects to be created for the Signal frame Auxiliary indicator (Zs3v)

8.To lay the foundation, first mark the Signal mount with the Mounting type 'Signal arrangement mast' (W). Then use the 'New' (Y) button to create a new Signal mounting for the Fundament (X).

Illus.: Creating the Signal mounting Foundation

For the Signal mounting 'Fundament' (X), the following attributes have to be edited:

Table: Attributes to be edited for the newly created Signal mounting Foundation

9.The button 'Close' (Z) will close the dialog and display the signal in the drawing.

Illus.: Signal 60VWzu22 in the drawing